PPAI 113280 • ASI 96450 • UPIC WENDELLS •SAGE 54418
Bronze
Bronze is the epitome of classic material used in minting with over 2,000 years of tradition well in place. Mint your custom coin in bronze to ensure the high level of quality and durability you would expect from such a historic material. The golden lustre of the metal works well in highlighting the intricate designs and sculptured relief your artwork brings to each and every coin.
Bronze coins may also be finished in Satin or Antique to further enhance your imagery.
All new coin and medallion projects begin with an intital consultation over your desired artwork in order to determine the complexity of your dies. There is an initial set up fee for the coining dies used, however these can be used again and again to replicate your minted pieces at your leisure. Please contact our sales team to begin this process, and in the meantime feel free to read our production guide for information on the different levels of artwork complexity.
| Item # | WT/M | 100 | 250 | 500 | 1,000 | 2,500 | 5,000 | 10,000 | 25,000 | |
|---|---|---|---|---|---|---|---|---|---|---|
 |
||||||||||
| 14 GAUGE COINS | ||||||||||
| .984" | GB114 | (16) | - | - | 0.99 | 0.65 | 0.52 | 0.47 | 0.41 | 0.39 |
| 1-5/16" | GB514 | (29) | 1.99 | 1.53 | 1.11 | 0.95 | 0.78 | 0.71 | 0.63 | 0.56 |
| 12 GAUGE COINS | ||||||||||
| 1-5/16" | GB512 | (40) | 2.17 | 1.67 | 1.26 | 1.09 | 0.91 | 0.84 | 0.74 | 0.70 |
| 39mm | GB812 | (49) | 2.42 | 2.23 | 1.68 | 1.36 | 1.17 | 1.11 | 0.95 | Quote |
| 1-9/16" | GB912 | (49) | 2.42 | 2.23 | 1.68 | 1.36 | 1.17 | 1.11 | 0.95 | Quote |
| 10 GAUGE COINS | ||||||||||
| 39mm | GB810 | (60) | 2.52 | 2.33 | 1.81 | 1.62 | 1.41 | 1.26 | 1.10 | Quote |
| 1-9/16" | GB910 | (60) | 2.52 | 2.33 | 1.81 | 1.62 | 1.41 | 1.26 | 1.10 | Quote |
| 1-15/16" | GB1510 | (88) | 5.98 | 5.30 | 4.74 | 3.99 | 3.87 | 3.68 | 3.16 | Quote 8(C) |
| Finishes | ||
|---|---|---|
| Antiquing | 0.34 | C |
| Satin | 0.00 | C |
| Bright Standard | 0.00 | C |
| Handling and Set-Up | ||
|---|---|---|
| Embedment | 0.25 | C |
| Attaching | 0.28 | C |
| Die Changes | 50.00 | Z |
| Painting | Quote | Z |
| Customization | ||
|---|---|---|
| Reeded Edges | 0.00 | C |
| Surface Numbering | 0.25 | C |
| Edge Numbering | 0.48 | C |
| Extended Loop (Inc. Hole Pierce) |
0.16 | C |
| Hole Pierce | 0.36 | C |
| Flat Sided | 0.20 | C |
| Special Shapes (1-5/16") | 0.80 | C |